Capabilities

CAPABILITIES AND PREFERENCES

SPECIFICATION Preferred Minimum

mm. inches mm. inches

Track Width Gap 0.2 0.008 0.15 0.006

Minimum land around hole 0.2 0.008 0.15 0.006

Annular Ring Clearance 0.3 0.012 0.2 0.008

Minimum hole diameter 0.4 0.016 0.3 0.012

Minimum clearance on Solder resist 0.08 0.003

Minimum line width on legend 0.02 0.008

Corner markers on external copper layer. Inside edge designates board profile. or

Line around profile. Centre designates board profile. 0.15 0.006

ADDITIONAL USEFUL INFORMATION: Text file showing which file refs. relate to which layer.

Format for Gerber and drill files.

NOTATION COMPONENT IDENTS Metric Imperial

(Legends available in White, Yellow and Black)

Alignment postional tolerance +/- 0.2 mm. +/- 0.008 in.

Minimum letter width on photoplot

In copper 0.25 mm. 0.010 in.

Screen printed 0.2 mm. 0.008 in.

BOARD AND PANEL SIZES Metric Imperial

Maximum panel dimensions 610 x 355 mm. 24 x 14 in.

Minimum panel dimensions 150 x 150 mm. 6 x 6 in.

Maximum board dimensions 560 x 305 mm. 22 x 12 in.

Minimum board dimensions 13 x 6 mm. 0.5 x 0.25 in.

HOLE DIAMETERS TOLERANCE RANGE Metric Imperial

Drilled Only:

Up to 1 mm. (0.039 in.) +/- 0.025 mm. +/- 0.001 in.

1 mm. to 2mm. (0.039 in./0.078 in.) +/- 0.038 mm. +/- 0.0015 in.

Above 2 mm. (0.078 in.) +/- 0.050 mm. +/- 0.002 in.

Plated Holes:

Up to 1 mm. (0.039 in.) +/- 0.050 mm. +/- 0.002 in.

1 mm. to 2mm. (0.039 in./0.078 in.) +/- 0.076 mm. +/- 0.003 in.

Above 2 mm. (0.078 in.) +/- 0.087 mm. +/- 0.0035 in.

DRILLED HOLE POSITION TOLERANCE

Hole positions located from film 0.076 mm. 0.003 in.

MACHINE CUTTING TOLERANCE

NC Routing +/- 0.1 mm. +/-0.004 in.

REGISTRATION TOLERANCE (Pad/Hole Ratio)

Drill positional tolerance +/- 0.076 mm. +/- 0.003 in.

Pad positional tolerance (photo) +/- 0.025 mm. +/- 0.001 in.

Photo location tolerance +/- 0.076 mm. +/- 0.003 in.

Etch factor 0.0013 mm. 0.0005 in.

Minimum annular ring requirement 0.076 mm. 0.003 in.

TOTAL MANUFACTURE TOLERANCE 0.254 mm. 0.0105 in.

(This does not take into account mis-registration within artworks)

SPECIFICATION	Preferred		Minimum
	mm.	inches	mm.	inches
Track Width Gap	0.2	0.008	0.15	0.006
Minimum land around hole	0.2	0.008	0.15	0.006
Annular Ring Clearance	0.3	0.012	0.2	0.008
Minimum hole diameter	0.4	0.016	0.3	0.012
Minimum clearance on Solder resist			0.08	0.003
Minimum line width on legend			0.02	0.008
	Corner markers on external copper layer. Inside edge designates board profile. or
Line around profile. Centre designates board profile.	0.15	0.006
ADDITIONAL USEFUL INFORMATION: Text file showing which file refs. relate to which layer. Format for Gerber and drill files.

NOTATION COMPONENT IDENTS	Metric	Imperial
(Legends available in White, Yellow and Black)
Alignment postional tolerance	+/- 0.2 mm.	+/- 0.008 in.
Minimum letter width on photoplot
In copper	0.25 mm.	0.010 in.
Screen printed	0.2 mm.	0.008 in.

BOARD AND PANEL SIZES	Metric	Imperial
Maximum panel dimensions	610 x 355 mm.	24 x 14 in.
Minimum panel dimensions	150 x 150 mm.	6 x 6 in.
Maximum board dimensions	560 x 305 mm.	22 x 12 in.
Minimum board dimensions	13 x 6 mm.	0.5 x 0.25 in.

HOLE DIAMETERS TOLERANCE RANGE	Metric	Imperial
Drilled Only:
Up to 1 mm. (0.039 in.)	+/- 0.025 mm.	+/- 0.001 in.
1 mm. to 2mm. (0.039 in./0.078 in.)	+/- 0.038 mm.	+/- 0.0015 in.
Above 2 mm. (0.078 in.)	+/- 0.050 mm.	+/- 0.002 in.
Plated Holes:
Up to 1 mm. (0.039 in.)	+/- 0.050 mm.	+/- 0.002 in.
1 mm. to 2mm. (0.039 in./0.078 in.)	+/- 0.076 mm.	+/- 0.003 in.
Above 2 mm. (0.078 in.)	+/- 0.087 mm.	+/- 0.0035 in.

REGISTRATION TOLERANCE (Pad/Hole Ratio)
Drill positional tolerance	+/- 0.076 mm.	+/- 0.003 in.
Pad positional tolerance (photo)	+/- 0.025 mm.	+/- 0.001 in.
Photo location tolerance	+/- 0.076 mm.	+/- 0.003 in.
Etch factor	0.0013 mm.	0.0005 in.
Minimum annular ring requirement	0.076 mm.	0.003 in.
TOTAL MANUFACTURE TOLERANCE	0.254 mm.	0.0105 in.
(This does not take into account mis-registration within artworks)